The Critical WireGuard DNS Caveat
WireGuard is exceptionally fast and secure because it operates as a silent, UDP-based kernel protocol. However, WireGuard has a well-known architectural nuance:
WireGuard only resolves domain names once—at the moment the interface is initialized (e.g. during wg-quick up wg0).
If your home VPN server's public IP changes while roaming on mobile or traveling:
- The WireGuard client will continue sending encrypted handshake packets to the old, dead IP address indefinitely.
- No error message will appear; the connection simply stalls and traffic drops into a black hole.
- Only restarting the tunnel or forcing an endpoint re-resolution restores the tunnel.
The Solution: 60-Second TTL + Automated Re-resolution
Two ingredients are required for a frictionless WireGuard dynamic setup:
- Rapid DNS Propagation: XYZ.FRL serves DNS records with a strict 60-second TTL (Time to Live). When your home server notifies XYZ.FRL of a new IP, our authoritative nameservers update globally within seconds.
- Client-Side Re-resolution: A periodic cron check or the official
wireguard-toolsscriptreresolve-dns.shre-resolves the endpoint if handshakes stall.
Step 1: WireGuard Server Configuration
On your home WireGuard server (e.g. Raspberry Pi, Proxmox VM, or home router), configure a PostUp hook in /etc/wireguard/wg0.conf to report the current public IP as soon as the interface boots:
[Interface]
Address = 10.100.0.1/24
ListenPort = 51820
PrivateKey = <server-private-key>
# Automatically update XYZ.FRL whenever WireGuard starts
PostUp = curl -fsS --user 'YOUR_USERNAME:YOUR_PASSWORD' 'https://xyz.frl/nic/update' || true
[Peer]
# Roaming Client
PublicKey = <client-public-key>
AllowedIPs = 10.100.0.2/32
Step 2: Client Peer Configuration
In your laptop, phone, or remote peer configuration, specify your assigned XYZ.FRL domain as the Endpoint:
[Interface]
Address = 10.100.0.2/24
PrivateKey = <client-private-key>
DNS = 1.1.1.1, 8.8.8.8
[Peer]
PublicKey = <server-public-key>
Endpoint = <your-uuid>.xyz.frl:51820
AllowedIPs = 0.0.0.0/0, ::/0
PersistentKeepalive = 25
PersistentKeepalive = 25 ensures that NAT traversal state remains open across intermediate firewalls and stateful mobile carrier gateways.
Step 3: Client Automated Re-resolution (Linux/macOS)
For Linux laptops or edge routers acting as clients, deploy the official reresolve-dns.sh helper script provided by WireGuard to recheck DNS whenever handshake timeouts exceed 120 seconds:
# Check endpoint resolution every 5 minutes
*/5 * * * * /usr/share/doc/wireguard-tools/examples/reresolve-dns/reresolve-dns.sh wg0 >/dev/null 2>&1
Autonomous Mesh VPN Orchestration
Autonomous agents deployed across heterogeneous clouds and edge locations can discover each other's live WireGuard listening sockets using remote Model Context Protocol.
Each agent node calls generate_hostname on startup, publishes its endpoint to shared agent memory, and updates its A/AAAA records whenever moving across networks.